Projecta VSR200 Dual Battery Voltage Sensitive Relay 12V 200A - Led Indicator

Projecta 12V 200A Voltage Sensitive Relay

VSR200

SOLD AS EACH

The perfect no-fuss power management controllers are suitable for a wide variety of 12V DC applications, e.g., winching, etc.

Suitable for a wide variety of 12V DC applications, the VSR units sense the input voltage generated and automatically connect/disconnect the appliance or circuit at pre-set voltages. Fully sealed to IP66 and surge-protected, the VSR units are ideal for dual battery setups as they enable the batteries to be paralleled for high power usage, e.g., jumpstarting or winching.

Features

• L.E.D indicator
• L.E.D illuminates when VSR is activated
• Sealed electronics
• Prevents dust and water ingress (IP66)
• Surge protection
• Built-in protection guard’s vehicle against voltage spikes
• Manual override
• Bypasses automatic settings allowing the relay to engage below-set voltages
• Silvertip contacts
• Provide exceptional current transfer

Specifications

• Part No: VSR200
• Voltage: 12V
• Charging Current: 200A Continuous, 400A Peak
• Cut-In Voltage: 13.4V
• Cut-Out Voltage: 12.8V
• Cut-Out Delay: 8 seconds
• Minimum Operating Voltage: 10V
• Charge Type: Parallel
• Control: MCU
• Mounting: Surface/firewall
• Current Draw: Charging 680mA (standby 10mA)
• Surge Protection: Built-in
• Ingress Protection: IP66
• Override: Requires min. 10V
• Recommended Fuse: 250A
• Minimum Cable Size: 32mm2 (2 B&S)
• Approvals: EMC