Threebond 1207C Liquid Gasket Super Sealer 150G for Oil Pan Fast Curing x1

Threebond Liquid Gasket Super Sealer 150g

1207C-150

SOLD AS EACH

Threebond Liquid Gasket Super Sealer RTV Silicone Sealant, Red/Brown 150gm tube, fast curing with high tolerance to pressure, ideal for oil pans, thermostats, oil, and water pumps, rapid dry. Ideal for race engines & high-performance applications.

Part number: 1207C-150

The product Three Bond 1207C is a single component| solvent free and non-acid liquid gasket on RTV-Silicone basis (Room Temperature Vulcanizing) with low odor. Within a very short time it forms a rubber-like highly elastic gasket completely adapted to the surface structure of the flange facing. Three Bond 1207C has been designed specifically as liquid gasket for flange facings which excel in a high strength and are easy to remove e.g., water pumps, heat exchanger, oil pans, etc. 

Features

• Excellent chemical resistance against coolants and engine oil 
• Outstanding mechanical and thermal resistance 
• Excellent adhesion even to slightly polluted surfaces 
• Extremely fast curing 
• Instantaneous impermeability for pressure- and fire test. 
• Acceleration of the curing process by heat and contact with the medium 
• No shrinkage and no generation of corrosive gases 
• No corrosion of metal and only very slight reaction on plastics  
• Easy disassembly
• 250 degrees C temperature rated
• Tack-free in 7 minutes
• Full cure in 24 hours
• Directions for use on the box

Instructions

• Keep the original container tightly closed and store it in a dark dry sufficiently ventilated and cool place at a temperature of 5 ~ 25°C
• Before opening the container let the product reach room temperature as otherwise the formation of dew would be resulting
• The formation of skin and the thick hardenability of silicone vary depending upon the thickness of the layer| the ambient temperature and the relative air humidity
• To obtain optimal results| remove humidity| fat and other impurities from the fitting surfaces
• According to the nature of the joints (width| surface roughness| unevenness’s) apply an appropriate quantity of silicone uniformly on one of the fitting surfaces and assemble the parts within 5 minutes
• If the liquid gasket will be applied by means of our OLGS (Online Gasket System) this always permits even in case of complicated shapes a uniform clean and reliable dispensing with a 
• minimum consumption
• Silicone once transferred into another container should not be returned to the original container. Excess sealant can be easily wiped off with a cloth